Long-term joint effect of nutrients and temperature increase on algal growth in Lake Taihu, China

To study how global warming and eutrophication affect water ecosystems, a multiplicative growth Monod model, modified by incorporating the Arrhenius equation, was applied to Lake Taihu to quantitatively study the relationships between algal biomass and both nutrients and temperature using long-term data. To qualitatively assess which factor was a limitation of the improved model, temperature variables were calculated using annual mean air temperature (AT), water temperature (WT), and their average temperature (ST), while substrate variables were calculated using annual mean total nitrogen (TN), total phosphorus (TP), and their weighted aggregate (R), respectively. The nine fitted curves showed that TN and AT were two important factors influencing algal growth; AT limited growth as algal photosynthesis is mainly carried out near the water surface; N leakage of phytoplankton and internal phosphorus load from sediment explains why TN was the best predictor of peak biomass using the Monod model. The fitted results suggest that annual mean algal biomass increased by 0.145 times when annual mean AT increased by 1.0℃. Results also showed that the more eutrophic the lake, the greater the effect AT had on algal growth. Subsequently, the long-term joint effect of annual temperature increase and eutrophication to water ecosystems can be quantitatively assessed and predicted.     

Decolorization of dye solutions with Ruditapes philippinarum conglutination mud and the isolated bacteria

Application of Ruditapes Philippinarum conglutination mud (RPM) for decolorizing synthetic dye solutions was studied. RPM showed good activity for decolorization of Methylene Blue, Crystal Violet, Malachite Green, and Ink Blue. The amount of the RPM had great effect on the decoloration rate of the dye solutions. However, the decoloration rate did not continue to increase when the amount of mud exceeded the optimum dose. The temperature of the dye solution had a remarkable effect on the decolorization rate of Ink Blue solution, but had little effect on the other three dye solutions. The initial pH of the dye solutions evidently affected the decolorization rate of Malachite Green solution, but had less effect on the other three. The decolorization rate of the dye solutions increased significantly with treatment time within 8 hr, but tended to be steady after 8 hr for Methylene Blue, Crystal Violet and Malachite Green solutions, and after 12 hr for Ink Blue solution. The decolorization efficiencies for the four dye solutions under the optimum conditions were all above 90%. Seventeen strains screened from RPM showed flocculation ability for kaolin clay suspension. Out of them, the flocculation rate of strain ZHT3-9 and strain ZHT4-13 were up to 88.14% and 86.01%, respectively. ZHT3-9 was studied, and its decolorization rate for Methylene Blue, Crystal Violet, and Malachite Green reached 90.02%, 89.21%, and 80.29%, respectively. By morphological, physiological and biochemical characteristics analysis and 16S rRNA sequencing, the strain ZHT3-9 was identified as Arthrobacter sp.     

Characteristics of nitrogen and phosphorus removal in a sequencing batch reactor

Laboratory scale experiments were conducted to study the characteristics of N and P removal under different influent organic carbon concentration in a sequencing batch reactor (SBR) with simple anaerobic/aerobic operating mode. Experimental results indicated that, under the operating condition of influent N concentration of 89 mg/L and P concentration of 15 mg/L, when the influent C/N ratio increased from 1.5 to 6.9 (influent C/P ratio from 9 to 41), total N and P removal efficiency improved from 50% and 46% to 78% and 96% respectively. Track studies of N, P and other operating parameters demonstrated that N removal of the SBR was realized through simultaneous nitrification and denitrification (SND) in the aeration phase and anoxic denitrificaiton in the filling phase, P removal was accomplished through conventional anaerobic P release and aerobic P taken-up process. Keeping dissolved oxygen (DO) concentration during the first two aeration hours as low as 0.1-0.6 mg/L is essential for the simultaneous occurrences of nitrification, denitrification and P-taken up.     

Microstructures and electrochemical behaviors of the friction stir welding dissimilar weld

By using optical microscope, the microstructures of 5083/6082 friction stir welding (FSW) weld and parent materials were analyzed. Meanwhile, at ambient temperature and in 0.2 mol/L NaHS0₃ and 0.6 mol/L NaCl solutionby gravimetric test, potentiodynamic polarization curve test, electrochemical impedance spectra (EIS) and scanning electron microscope (SEM) observation, the electrochemical behavior of 5083/6082 friction stir welding weld and parent materials were comparatively investigated by gravimetric test, potentiodynamic polarization curve test, electrochemical impedance spectra (EIS) and scanning electron microscope (SEM) observation. The results indicated that at given processing parameters, the anti-corrosion property of the dissimilar weld was superior to those of the 5083 and 6082 parent materials.     

基于Landsat TM遥感数据的沈阳市生态环境监测与评价

以近年Landsat TM 遥感图像为基础数据源,利用遥感与GIS技术对沈阳市生态环境状况进行了监测.结果表明,2009年间沈阳市生态环境质量处于一般水平,与2008年相比,生态环境质量指数上升,生态环境状况呈现变好的趋势.     

沈阳市"十二五"期间NOx总量控制对策与建议

在分析沈阳市NOx排放现状及发展趋势基础上,针对NOx总量控制工作中存在基础薄弱、污染物增量大、治理技术上存在不确定因素等实际问题,总结了"增量控制,存量削减"的总体工作思路,并提出了实施电力企业脱硝工程改造的对策和建议.     

协同氧化工艺处理焦化废水的试验研究

采用微电解-芬顿氧化的组合工艺处理末端焦化废水,考察静态实验中微电解填料的铁碳比、过氧化氢添加方式及加入量、曝气量、反应时间、pH值等不同条件因素对COD去除率的影响情况,确定最佳条件是铁碳质量比是2.5∶1,分批加入过氧化氢,且加入量为0.25 mL/L,曝气量为1.25 L/min,pH值为3,反应时间140 min.最终实现将焦化废水COD的去除率达88％以上的目的.按静态实验的各因素条件进行动态实验,试验结果COD去除率可达87％以上,处理后℃OD质量浓度为为91 mg/L,达到排放标准.同时处理后焦化废水的颜色变淡.     

进一步探讨内蒙古自治区环境突发性污染事件应急监测工作

随着内蒙古经济社会的快速发展,环境突发性事件应急监测存在一些新问题,根据内蒙古实际情况,探讨环境突发性污染事件应急监测工作思路,进一步保护环境和人类生命安全。     

进一步探讨内蒙古自治区环境突发性污染事件应急监测工作

随着内蒙古经济社会的快速发展,环境突发性事件应急监测存在一些新问题,根据内蒙古实际情况,探讨环境突发性污染事件应急监测工作思路,进一步保护环境和人类生命安全。